CHL
Supervision Continuing Education (SCE)
SELF-STUDY PLANS

Supervisory Continuing Education (SCE) lessons provide members with ongoing education focusing on supervisory or management issues. These lessons are designed for CHL re-certification, but can be of value to any CRCST in a management or supervisory role.

You can use these lessons as an in-service with your staff, or visit www.iahcsmm.org for online grading at a nominal fee ($5 per single lesson plan, or bundled packages are available for quantities of 6 lessons for $25 (save $5) or 12 lessons for $50 (save $10) for greater savings).

Each lesson plan graded online with a passing score of 70% or higher is worth one point (contact hour). You can use these points toward either your re-certification of CRCST (12 points) or CHL (6 points), but you can not use them for both.

Mailed submissions to IAHCSMM will not be graded and will not be granted a point value (paper/pencil grading of the SCE Lesson Plans is not available through IAHCSMM or Purdue University; IAHCSMM accepts only online subscriptions of the SCE Lesson Plans).

Lesson Plan CHL 300
Training Basics for Central Service Managers: Part VI
(Developing Training Objectives and Training Plans)
[Reprinted from Communiqué: January/February 2007]

Figure 1 reviews where we are in our discussion about the training process.
The development of training objectives is very important because they are used for two purposes:

• To help the trainer connect the purpose(s) of the training program with its content. Specific reasons for training become clear when training needs are defined (Step 1 in Figure 1), and when the content of the training-program is known as position analysis (Step 2 in Figure 1) is undertaken.

• To help in the evaluation of training (Step 9 in Figure 1).

After training objectives are developed, one can develop training plans that provide an overview of the entire program. They are essential to assure that the facility's limited time, financial and other resources are best used to develop and deliver training focused on achieving planned objectives.

All About Training Objectives

Training objectives are statements that specify what trainees should know and be able to do when they successfully complete the training. It makes sense that those who plan training programs must know what training is to be accomplished, and training objectives help planners to consistently do this. Effective training is performance-based. It is organized in a way that helps trainees learn the tasks that are considered essential to correctly do their work. Competent staff members are those who have been trained and are able to contribute to the achievement of desired results.

Training objectives should be performance-based because they are critical to training evaluation, and they describe the expected results of the training rather than the training process itself. Consider the difference between the following objectives:

As a result of satisfactory completion of the training session, the trainee will:

Objective One: Study the process to properly load a steam sterilizer.

Objective Two: Properly load a steam sterilizer.

The first objective is not performance-based because it emphasizes the training process ("study"). The performance expected if the training is successful is described in objective two ("properly load a steam sterilizer"). The skills taught in training can be evaluated because the trainer can compare how the trainee loads a steam sterilizer with the operating procedures that were taught during the training.

Figure 2 illustrates the importance of training objectives.

Figure 2 indicates that the knowledge and skills required for effective work performance drive training objectives. They, in turn, dictate the content of the training program. The content of the training then impacts the training process that is implemented and the tactics used for training evaluation. Figure 2 also suggests that training evaluation can address the extent to which content was mastered and the usefulness of the training process.

To be useful, objectives must be reasonable (attainable), and they must be measurable. Objectives are not reasonable when they are too difficult or too easy to attain. For example, the following objective for a supervisory training program to reduce the turnover rate is not likely to be attained: “As a result of successful training, there will be a zero turnover rate except for natural attrition beginning with staff members employed after 1/1/XX.” By contrast, an objective stating that, “The turnover rate for the Central Service Department will be reduced by 20% within twelve months of training,” may be a reasonable training objective.

Training objectives should incorporate an element of “stretch.” Assume that a Central Service department is currently receiving some customer complaints per month. Reducing the complaint rate to zero immediately after training is likely to be overly-optimistic. By contrast, the objective of reducing the complaint rate by one per month after a six month period required for process revision and implementation may not be appropriate for the opposite reason: no or very little significant change in staff performance may be necessary to attain that objective. A better approach: Managers can assess common reasons for the complaints (Step 1 in the training process in Figure 1). Then revised processes resulting from position analysis (Step 2 in Figure 1) can be developed to drive training content. Training objectives relating to trainees mastering the revised process to reduce complaints can be developed, and the extent of this reduction will be a measure of training effectiveness.

The concern that training objectives be measurable relates directly to their role in training evaluation. How could you evaluate the effectiveness of a training program whose success would be measured by objectives such as:

• Trainees will realize the importance of good customer service

• Trainees will understand the need to use a first-in first-out (FIFO) inventory rotation system.

• Trainees will recognize the need to safely operate steam sterilizers.

Contrast the above with objectives pertaining to the same topics that are measurable:

• Trainees will demonstrate a six-step method to manage guest complaints.

• Trainees will be able to identify poor inventory rotation practices as they visit a storeroom with incorrectly-arranged items.

• Trainees will operate steam sterilizers in a way that incorporates the manufacturers’ safe operating instructions identified in the operating manual.

Training objectives typically use an action verb to tell what the trainee must demonstrate or apply after training. Examples of acceptable verbs include: “Operate,” “Calculate,” “Explain” and “Assemble.” By contrast, verbs that are unacceptable because they cannot be measured include “Know,” “Appreciate,” “Believe,” and “Understand.”

All About Training Plans

Training plans should be developed after training objectives are written because they organize training content, and they provide an overview of the structure and sequence of the training program. They show how individual training lessons should be sequenced to best allow trainees to use their skills and learn the knowledge required for improved performance.

Several factors should be considered when determining the sequence for subject-matter in the training plan:

• Begin the program with an introduction that explains why the training is important and how it will benefit the trainees.

• Provide an overview of training content.

• Plan training lessons to progress from simple-to-complex. Simple information at the beginning of the training will allow trainees to more quickly feel at ease and comfortable with the learning situation. It will also give them the confidence needed to master the entire program.

• Build on the trainees’ experiences. Combine unfamiliar information with familiar content. This allows trainees to build on their experience.

• Present basic information before more detailed concepts are discussed.

• Consider the need for “nice-to-know” and “need-to-know” information. Basics should be presented before other information, and it is generally best to address the “whys” before the “hows.”

• Use a logical order. What information is a prerequisite to other information as knowledge is developed or skills are attained?

Training plans allow trainers to (a) plan the dates and times for each training lesson, (b) consider the topic (lesson number and subject), (c) state the location for training (d) indicate the instructor(s) responsible for the training and (e) determine the trainees for whom specific training lessons are applicable.

Assume a trainer is planning a training program for a new Central Service technician who must learn how to correctly perform all tasks in the position. Perhaps several tasks can be taught in one training session. By contrast, several (or more) training sessions may be needed to teach just one other task. The training plan allows planners to think about what must be taught (training lessons), and the sequence and duration of each training lesson.

When a training plan is developed to teach all tasks to a new staff member, training dates and times must only consider the availability of the trainer and the employee. By contrast, if the training addresses a special problem impacting more than one employee, other tactics may be necessary. If a three-part training program is being planned to introduce a new customer service program, each session might be planned for two (or more) alternate dates and times to accommodate all affected personnel.

The entire customer service training program could be sequenced into three parts (for example, introduction/overview/benefits, basic customer service procedures and managing customer service in special situations). The training location could be the same for every session (for example, a small group meeting room in the facility), or it could accommodate group training in a congregate setting and individual training in work stations. The trainees might include all staff members for Session 1 and only selected staff members for special situations in Session 3.

In Conclusion

Training objectives help trainers to plan the training and training plans help them to organize it. In the next article in this series, we’ll discuss three steps: developing training lesson, organizing training handbooks and preparing trainees.